Phone(s): (613) 774-1616 (888) 281-3267
Fax: (613) 774-5226

2301 Highway 31
Winchester Ontario
K0C 2K0

Massey Ferguson RB4160V Round Balers

Specifications

Model	MF RB4160V	Category Name	Hay and Forage	Year	2023
Sale Type	New	Manufacturer	Massey Ferguson	Odometer	km
Model	MF RB4160V	Bale Size (FT)	4x5	XTRACUT Rotor
PIckup Width (IN)	78"	Bale Diameter (IN)	35.5" - 63"	Approx. Weight (LBS)	8,680
Hydraulic Requirements (DA)	2 DA	Minimum PTO Horsepower (HP)	100	Price	Contact for price CAD

Description

The ultra-efficient Massey Ferguson® RB 4100 Series round baler is built to handle everything your operation demands. Ideally suited for dairy farms or cow/calf operations that need a rugged design to stand up to rigorous baling schedules. The innovative performance features all add up to faster production and the highest quality forage possible.

Brand new aged inventory

-2023

-4x5 BALE

-78'' PICKUP

-XTRACUT ROTOR

-110 MINIMUM HP

-2 REMOTES

-17 KNIVES

-17,9,8,0 BLADE OPTIONS

-2.65'' CUT LENGTH (ALL BLADES ENGAGED)

-HYDROFLEX DROP FLOOR

-FLOATING TAILGATE

-CAMLESS PICKUP

73'' TINE TO TINE WITH 5 BARS

-BALE COUNTER

-GREASE BANKS

DEMO AVAILABLE

**BIG DISCOUNTS AVAILABLE**

KEY BENEFITS

MORE VERSATILE PROCESSING

Mechanically conveying net from the net drive rollers to the bale at the beginning of the net tie process optimizes performance in all conditions. Front-mounted mesh system provides easy viewing. Easy Load System (ELS) uses a cradle to move the stored mesh roll into the operating position. Compatible with edge-to-edge or over-the-edge mesh wrap. Also has storage for two extra rolls of net (non-Protec).

MORE CONSISTANT BALE OUTPUT

The RB Series features five tine bars and teeth spaced just 2.5 inches apart, allowing for a far more complete capture of crop on the field. A crop press roller is positioned in front of the pickup to enhance crop feeding into the chamber. The tailgate floats down as the bale is being formed to optimize the feed angle off of the rotor as the bale gets larger. This in conjunction with the Constant Pressure System (CPS) ensures consistent bale shape and density.

OPTIMIZED OPERATOR PRODUCTIVITY

Optional RB 4160V Protec provides the ability for a single operator to process and fully package bales quickly and efficiently, resulting in the highest quality forage wet or dry. Wrapper table and ring operate independently, ensuring proper encapsulation of bales while film wrapping.

MORE VERSATILE CUTTING

Two sets of XtraCut™ hydraulically operated knife banks can be controlled or disengaged from the tractor cab. Select zero, eight, nine or all 17 knives to attain forage cuts as small as 2.65 inches in length.

MORE OPERATOR CONTROL

VARIONET WRAPPING Optional E-Link Pro™ touch-screen monitor tracks bale formation and allows in-cab control of cutter engagement and knife group selection. In addition, the baler’s ISOBUS design allows the use of any compatible tractor monitor for baler monitoring control.

PERFORMANCE

MORE TINE BARS

Due to the additional space created through the absence of a cam track, five tine bars are now fitted to the pickup. With the tines spaced just 2.5 inches apart, you get an even better and cleaner crop intake.

OFFSET TINES

When looking at the RB Series pickup, you’ll notice offset tines on the ends. This allows the pickup to continually and consistently feed the crop flow augers, giving you square, shouldered bales.

MORE DURABLE TINES

The tine is longer, thicker and more flexible for increased lifespan. Improved tine fixation also helps prevent tine breakage, because the tension within the material is more evenly spread.

ANGLED FOR CLEANER PICK-UP

The angle of the tine has been adjusted to ensure the cleanest possible crop pickup under all crop and soil conditions.

MAXIMUM THROUGHPUT

The HydroFlex Drop Floor features heavy mechanical springs that allow the knife bed to float open slightly when an obstruction occurs. If the rotor is plugged, the operator can hydraulically drop the floor from the tractor cab to clear the plug.

Hydroflexcontrol - Stage 1

The first stage of Hydroflexcontrol allows movement of the front part of the feed chamber floor and will automatically prevent up to 80% of potential blockages and will keep you going without unnecessary downtime.

Hydroflexcontrol - Stage 2

Should a major blockage occur, stage two of HydroFlex Control is activated by the operator and is cleared by lowering the rear of the feed table floor hydraulically from the cab, allowing for material to easily pass through.

PRODUCTIVITY

IMPROVED CROP THROUGHPUT

The pickup design maximizes efficiency of crop flow from the windrow into the rotor without hesitation into the bale chamber for best-in-class capacity and uniform bales every time.

HIGHER BALE COMPACTION

The constant pressure system ensures an equally dense bale throughout, and four continuous belts provide maximum traction while the bale forms, creating the chamber.

CAB-CONTROLLED HYDRAULICS

In the event of a blockage, the rear of the feed table floor can be lowered hydraulically from the operator’s seat. When lowering the feed floor, all knives are withdrawn, ensuring that the blockage has passed into the bale chamber without any wastage.

CONSISTENTLY SIZED BALES

The mechanical tailgate locking system ensures that the tailgate remains completely closed throughout the baling process, giving you consistently sized bales with little crop loss.

EFFICIENCY

VARIONET WRAPPING

System provides edge-to-edge or edge-over-edge wrapping, for perfect bale coverage every time. This means your bales not only look great, but they’re also completely protected against bad weather and crop losses.

ELS MAKES IT EVEN EASIER

The Easy Load System, or ELS, allows easier loading of the net roll. After loading, the new net roll is simply tipped backward, then lifted and locked into position. It makes the process simple, saving you time and effort.

E-LINK PRO

The E-link Pro touch-screen monitor lets you track bale formation, control cutter engagement and select knife group from inside the cab. In addition, the baler’s ISOBUS design allows the use of any compatible tractor monitor for baler monitoring/control.